****NDOR Config File locations for Bentley Products****
*			July 2011		      *
*******************************************************

NOTE:  IF YOU ARE DOWNLOADING ROW AND/OR TRAFFIC STANDARDS ONLY, YOU WILL NEED TO DOWNLOAD THE MICROSTATION
STANDARDS AS WELL.  THE MICROSTATION DOWNLOAD WILL SETUP THE DIRECTORIES NEEDED TO RUN THE NDOR STANDARDS.



Below is the location that NDOR places three configuration files for Geopak & MicroStation V8i SS2.

1.	The geopak.cfg is mentioned because the CADD Manager needs to remember if you change the 
	default install location for V8i, this file contains the string needed to launch geopak.
	NDOR had an issue with this file not updating, so we deliver the cfg and overwrite the 
	installed one.


2.	The NDOR_GeopakV8i.cfg identifies all the geopak configuration that NDOR uses on a daily 
	basis.  This file identifies the ddb and criteria file locations and the directory where 
	the geopak resource files are placed.

	The $(NDOR_Geopak) and $(NDOR_MS_Data) variables are identified in the NDOR_Consultant.ucf
	workspace

		This file needs to be placed in:
		C:\(your install location for MicroStation)\config\appl\

			Example:  NDOR's path
			C:\Program Files\BentleyV8i\MicroStation\config\appl\

		To get this config file to work, please edit the GPK_RSCDIR (found at the top of the 
		file) varialble path to match the path where you place the delivered NDOR support files.
		
			The delivered support files default to C:/ndor/


3.	The ndorv8i.cfg indentifies all the microstation configuration that NDOR uses on a daily
	basis.  This files is where the CADD Manager can tell microstation where to look for 
	workspaces, projects and interfaces.  

		This file needs to be placed in:
		C:\(your install location for MicroStation)\config\system

			Example:  NDOR's path
			C:\Program Files\BentleyV8i\MicroStation\config\system\

		To get this config file to work, please edit the _MY_WORKSPACE and _MY_USER (found at 
		the top of the file) variables to match the location you placed the NDOR support files.

			The delivered support files default to C:/ndor/


4.	The NDOR_Consultant.ucf mimics the workspace NDOR uses in-house.  This file in conjunction with
	the ndorv8i.cfg, will configure MicroStation to match NDOR's in-house configuration.  Users must
	pick this workspace to get access to NDOR levels, cells, and task menus.

		This file need to be placed in:
		C:\(location where NDOR support files are found)\users\ndor_civil\microstation\v8\workspace\Users

			Example:  NDOR's path
			C:\ndor\users\ndor_civil\microstation\v8\workspace\Users

		To get this config file to work, please edit the NDOR_MS_Data, NDOR_Geopak & MY_USER
		(found at the top of the file) variables to match the location you placed the NDOR
		support files.

			The delivered support files default to C:/ndor/

		This file also contains the configuration to run the NDOR addin applications for 32bit
		and 64bit operating systems.  These addin applications include:
			1. BoxLeader
			2. Sheets
			3. Culverts
			4. GPKTangents

			To get these applications to work correctly, you will need to change the 
			NDOR_ADDIN_SETTINGS_LOCATION variable to match the location you placed the 
			NDOR support files.

				Example:  NDOR's path
				c:/ndor/users/ndor_civil/microstation/v8/engrapps